Length
5 days
Version
2.0

Overview

In this course students will learn how to implement typical routing solutions from a networking design by leveraging Cisco IOS services along with utilising configuration, planning and verification methodologies. You will then apply these skills to implement and verify routing protocol’s found in modern enterprise networks.

ROUTE v2.0 includes major updates and follows an updated blueprint. However, note that this course does not cover all items listed on the blueprint. Some older topics have been removed or simplified, while several new IPv6 routing topics have been added. Course content has been adapted to Cisco IOS Software Release 15 and technically updated. Course also introduces new type of labs, called discovery labs. Discovery labs are instructor guided lab through which student explores new topics in an interactive way. All labs are developed only as virtual labs. To get the full course experience, you will cover everything, including Introduction, Discovery labs, Summary, and Module Self-Check.

Key Topics

Detailed Info
  • Basic Network and Routing Concepts
  • EIGRP Implementation
  • OSPF Implementation
  • Configuration of Redistribution
  • Path Control Implementation
  • Enterprise Internet Connectivity
  • Routers and Routing Protocol Hardening
Skills Gained
Key Topics
Target Audience
Prerequisites

Skills Gained

Upon completing this course students will be able to meet these overall objectives:

  • Routing protocols, network technologies, and remote connectivity options
  • RIPng in an IPv6 environment
  • Technologies, operations, and metrics that EIGRP uses
  • Configure and verify EIGRP in IPv4 and IPv6 environments including optimizing its behavior and named EIGRP configuration
  • Multiarea OSPF including over different network types and how to optimize its database
  • Configure and verify OSPFv2 in IPv4 environments and OSPFv3 in IPv4 and IPv6 environments
  • Route redistribution and how it is implemented using distribute list, prefix list, and route map filtering mechanisms
  • Use Cisco Express Forwarding for efficient Layer 3 packet forwarding
  • Implement path control using policy based routing and IP Service Level Agreement (SLA)
  • Establishing enterprise Internet connectivity for IPv4 and IPv6
  • BGP for enterprise IPv4 and IPv6 Internet connectivity
  • Secure Cisco routers according to best practices including the configuring routing protocol authentication

Key Topics

1. Basic Network and Routing Concepts

  • Differentiating Routing Protocols
  • Understanding Network Technologies
  • Connecting Remote Locations with the Headquarters
  • Implementing RIPng

2. EIGRP Implementation

  • Establishing EIGRP Neighbor Relationships
  • Building the EIGRP Topology Table
  • Optimising EIGRP Behavior
  • Configuring EIGRP for IPv6
  • Discovering Named EIGRP Configuration

3. OSPF Implementation

  • Establishing OSPF Neighbor Relationship
  • Building the Link State Database
  • Optimizing OSPF Behavior
  • Configuring OSPFv3

4. Configuration of Redistribution

  • Implementing Basic Routing Protocol Redistribution
  • Manipulating Redistribution Using Route Filtering

5. Path Control Implementation

  • Using Cisco Express Forwarding Switching
  • Implementing Path Control

6. Enterprise Internet Connectivity

  • Planning Enterprise Internet Connectivity
  • Establishing Single-Homed IPv4 Internet Connectivity
  • Establishing Single-Homed IPv6 Internet Connectivity
  • Improving Resilience of Internet Connectivity
  • Considering Advantages of Using BGP
  • Implementing Basic BGP Operations
  • Using BGP Attributes and Path Selection Process
  • Controlling BGP Routing Updates
  • Implementing BGP for IPv6 Internet Connectivity

7. Routers and Routing Protocol Hardening

  • Securing Cisco Routers
  • Describing Routing Protocol Authentication Options
  • Configuring EIGRP Authentication
  • Configuring OSPF Authentication
  • Configuring BGP Authentication

Labs
The following discovery labs are included in this course:

Discovery 1: Configuring RIPng

Discovery 2: Configuring and Investigating Basic EIGRP

Discovery 3: Building The EIGRP Topology Table

Discovery 4: EIGRP Stub Routing

Discovery 5: EIGRP Summarization

Discovery 6: EIGRP Load Balancing

Discovery 7: EIGRP for IPv6 Configuration

Discovery 8: Discovering Named EIGRP Configuration

Discovery 9: Basic OSPF Configuration Introduction

Discovery 10: Building the Link-State Database

Discovery 11: OSPF Path Selection

Discovery 12: OSPF Route Summarization

Discovery 13: OSPF Stub Areas

Discovery 14: Implementing OSPFv3

Discovery 15: Basic Redistribution

Discovery 16: Manipulate Redistribution

Discovery 17: Manipulate Redistribution Using Route Maps

Discovery 18: Analyzing CEF

Discovery 19: Implementing PBR

Discovery 20: NAT Virtual Interface

Discovery 21: Basic IPv6 Internet Connectivity

Discovery 22: Basic BGP Configuration

Discovery 23: Influencing BGP Path Selection

Discovery 24: BGP for IPv6

Discovery 25: Configuring EIGRP Authentication

Discovery 26: OSPF Authentication Configuration

 

The following challenge labs are included in this course:

Challenge 1: Configure RIPng

Challenge 2: Configure EIGRP

Challenge 3: Configure and Optimize EIGRP for IPv6

Challenge 4: Implement EIGRP for IPv4 and IPv6 Through Named Configuration

Challenge 5: Configure OSPF

Challenge 6: Optimize OSPF

Challenge 7: Configure OSPFv3

Challenge 8: Implement Redistribution Using Route Filtering

Challenge 9: Implement Path Control

Challenge 10: Configuring BGP

Challenge 11: Configure Authentication for EIGRP Routes

Challenge 12: Configure BGP Authentication

Target Audience

  • Channel Partner / Reseller
  • Customer
  • Employee
We can customize and deliver this training for larger groups — saving your organization time, money, and resources. For more information, email [email protected].

Prerequisites

The knowledge and skills that a learner must have before attending this Curriculum are as follows:

  • Describing network fundamentals
  • Establishing Internet and WAN connectivity (IPv4 and IPv6)
  • Managing network device security
  • Operating a medium-sized LAN with multiple switches, supporting VLANs, trunking, and spanning tree
  • Troubleshooting IP connectivity (IPv4 and IPv6)
  • Configuring and troubleshooting EIGRP and OSPF (IPv4 and IPv6)
  • Configuring devices for SNMP, Syslog, and NetFlow access
  • Managing Cisco device configurations, Cisco IOS images, and licenses

It is highly recommended that this course be taken after the following Cisco courses:

Print course details

The supply of this course by DDLS is governed by the booking terms and conditions. Please read the terms and conditions carefully before enrolling in this course, as enrolment in the course is conditional on acceptance of these terms and conditions.

Book Your Course

You don't appear to have Javascript enabled, our contact forms & booking process unfortunately requires it.

If you'd like more information, or to book a course please email us

November 11 - November 15

Email Course Outline
Request a Callback

Enter your details below and we'll email you a pdf of the course outline.

Enter your details below and one of our team will give you a call to answer any questions you may have.

Pre-Course Requirements

This course has requirements which must be completed before commencing.
Please click here to view.